Now this is retro computing once again, and I always love to get back to it. I have used the process described in my previous article https://astr0baby.wordpress.com/2017/04/27/pkgsrc-on-tru64-5-1b/ and used the pkgsrc/sysutils/cfengine2 environment to build cfengine2 like so:
===================================== ---- OSF1 tru64 V5.1 2650 alpha ---- ===================================== # cd /usr/pkgsrc/sysutils/cfengine2 # env CC=/data/gcc477/bin/gcc CXX=/data/gcc447/bin/g++ CFLAGS=-pthread bmake install
Here is the content of the pkgsrc/sysuitls/cfengine2
===================================== ---- OSF1 tru64 V5.1 2650 alpha ---- ===================================== drwxrwxr-x 6 600 125 8192 Jun 15 15:36 . drwxrwxr-x 577 600 125 24576 May 17 2014 .. drwxrwxr-x 2 600 125 8192 Apr 16 2014 CVS -rw-rw-r-- 1 600 125 383 Dec 22 2002 DESCR -rw-rw-r-- 1 600 125 817 May 3 2005 MESSAGE -rw-r--r-- 1 600 125 1039 Feb 13 2014 Makefile -rw-r--r-- 1 600 125 1490 Mar 12 2014 PLIST -rw-r--r-- 1 600 125 430 May 10 2010 distinfo drwxrwxr-x 3 600 125 8192 Dec 31 2005 files drwxrwxr-x 3 600 125 8192 May 10 2010 patches drwxr-xr-x 17 root 125 8192 Jun 15 18:29 work
You will need to have OpenSSL/DB4 mainly for this to build. Further below is the actual Makefile that gets generated my the bmake process, which I have modified slightly after some minor errors to have cfengine2 build completed.
What libraries are the binaries linked against ?
# OSF1 tru64 V5.1 2650 alpha # ldd cfagent Main => cfagent libcfengine.so.1 => /usr/pkg/lib/libcfengine.so.1 libdb4-4.8.so.8 => /usr/pkg/lib/libdb4-4.8.so.8 libpthread.so => /usr/shlib/libpthread.so librt.so => /usr/shlib/librt.so libm.so => /usr/shlib/libm.so libmach.so => /usr/shlib/libmach.so libexc.so => /usr/shlib/libexc.so libc.so => /usr/shlib/libc.so libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 Main => cfservd libcfengine.so.1 => /usr/pkg/lib/libcfengine.so.1 libdb4-4.8.so.8 => /usr/pkg/lib/libdb4-4.8.so.8 libpthread.so => /usr/shlib/libpthread.so librt.so => /usr/shlib/librt.so libm.so => /usr/shlib/libm.so libmach.so => /usr/shlib/libmach.so libexc.so => /usr/shlib/libexc.so libc.so => /usr/shlib/libc.so libgcc_s.so.1 => /usr/lib/libgcc_s.so.1
Here is the cfagent output
Reference time set to Thu Jun 15 23:58:19 2017 GNU Configuration Engine - 2.2.10 Free Software Foundation 1994- Donated by Mark Burgess, Oslo University College, Norway ------------------------------------------------------------------------ Host name is: tru64 Operating System Type is osf1 Operating System Release is V5.1 Architecture = alpha Using internal soft-class osf for host osf The time is now Thu Jun 15 23:58:19 2017 ------------------------------------------------------------------------ Additional hard class defined as: 64_bit Additional hard class defined as: osf1_V5_1 Additional hard class defined as: osf1_alpha Additional hard class defined as: osf1_alpha_V5_1 Additional hard class defined as: alpha Additional hard class defined as: osf1_alpha_V5_1_2650 GNU autoconf class from compile time: compiled_on_osf5_1 Address given by nameserver: 10.0.2.10 Trying to locate my IPv6 address Looking for environment from cfenvd... Unable to detect environment from cfenvd cfengine:tru64: No preconfiguration file $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ * (Changing context state to: update) * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ Looking for an input file /var/cfengine/inputs/update.conf (No file /var/cfengine/inputs/update.conf) Finished with /var/cfengine/inputs/update.conf Skipping update.conf (-F=0) $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ * (Changing context state to: main) * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --------------------------------------------------------------------- Loading persistent classes --------------------------------------------------------------------- --------------------------------------------------------------------- Loaded persistent memory --------------------------------------------------------------------- Looking for environment from cfenvd... Unable to detect environment from cfenvd Looking for an input file /var/cfengine/inputs/cfagent.conf (No file /var/cfengine/inputs/cfagent.conf) Finished with /var/cfengine/inputs/cfagent.conf Defined Classes = ( 64_bit Day15 GMT_Hr21 Hr23 Hr23_Q4 June Min55_00 Min58 Q4 Thursday Yr2017 alpha any cfengine_2 cfengine_2_2 cfengine_2_2_10 compiled_on_osf5_1 osf osf1_V5_1 osf1_alpha osf1_alpha_V5_1 osf1_alpha_V5_1_2650 tru64 undefined_domain ) Negated Classes = ( ) Installable classes = ( no_default_route ) Global expiry time for locks: 120 minutes Global anti-spam elapse time: 1 minutes Extensions which should not be directories = ( ) Suspicious filenames to be warned about = ( ) Accepted domain name: undefined.domain LogDirectory = /var/cfengine Loaded /var/cfengine/ppkeys/localhost.priv Loaded /var/cfengine/ppkeys/localhost.pub Checksum database is /var/cfengine/checksum_digests.db Default binary server seems to be tru64 Reference time set to Thu Jun 15 23:58:20 2017 --------------------------------------------------------------------- Alerts --------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++ Summary of objects involved ++++++++++++++++++++++++++++++++++++++++ global update main
And Included is the Makefile for cfengine2
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
pkgdatadir = $(datadir)/cfengine
pkglibdir = $(libdir)/cfengine
pkgincludedir = $(includedir)/cfengine
am__cd = CDPATH=”$${ZSH_VERSION+.}$(PATH_SEPARATOR)” && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = alpha-dec-osf5.1
host_triplet = alpha-dec-osf5.1
target_triplet = alpha-dec-osf5.1
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
ChangeLog INSTALL NEWS TODO acconfig.h compile config.guess \
config.sub depcomp install-sh ltmain.sh mdate-sh missing \
mkinstalldirs ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/conf.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo “$(srcdir)” | sed ‘s|.|.|g’`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo “$$p” | sed “s|^$$srcdirstrip/||”`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e ‘s|^.*/||’`;
am__installdirs = “$(DESTDIR)$(docdir)”
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = pub src contrib inputs doc
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ‘;’ \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = –best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/missing –run aclocal-1.10
AMTAR = ${SHELL} /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/missing –run tar
AR = ar
AUTOCONF = ${SHELL} /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/missing –run autoconf
AUTOHEADER = ${SHELL} /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/missing –run autoheader
AUTOMAKE = ${SHELL} /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/missing –run automake-1.10
AWK = /usr/pkg/bin/nawk
BERKELEY_DB_CFLAGS = -I/usr/pkg/include/db4
BERKELEY_DB_LDFLAGS = -L/usr/pkg/lib
BERKELEY_DB_LIB = -ldb4
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -D_REENTRANT -pthread -O2 -D_REENTRANT -I/usr/pkg/include -I/usr/pkg/include/db4 -I/usr/include -I/usr/pkg/include/db4
CPP = gcc -E
CPPFLAGS = -D_REENTRANT -I/usr/pkg/include -I/usr/pkg/include/db4 -I/usr/include
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL =
DUMPBIN =
DVIPS = false
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /usr/bin/grep -E
EIGHTBIT = \200-\377
EXEEXT =
FGREP = /usr/bin/grep -F
GCC_CFLAG = -g -O2 -Wreturn-type -Wmissing-prototypes -Wuninitialized
GETCONF = /usr/bin/getconf
GETLOADAVG_LIBS =
GREP = /usr/bin/grep
HOSTNAME = /bin/hostname
INSTALL = /usr/pkg/bin/install-sh -c -o root -g daemon
INSTALL_DATA = /usr/pkg/bin/install-sh -c -o root -g daemon -m 644
INSTALL_PROGRAM = /usr/pkg/bin/install-sh -c -o root -g daemon -m 755
INSTALL_SCRIPT = /usr/pkg/bin/install-sh -c -o root -g daemon -m 755
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
KMEM_GROUP =
LATEX = false
LD = /usr/ccs/bin/ld
LDFLAGS = -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -L/usr/lib -Wl,-R/usr/lib
LEX = flex
LEXLIB =
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS = ${LIBOBJDIR}getloadavg$U.o
LIBS = -L../pub -lcfpub -lpthread -lrt -lm
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIB_SELINUX =
LIPO =
LN_S = ln -s
LTLIBOBJS = ${LIBOBJDIR}getloadavg$U.lo
MAKEINFO = /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/.tools/bin/makeinfo
MKDIR_P = /usr/pkg/bin/gmkdir -p
NEED_SETGID = false
NM = /usr/bin/nm -B
NMEDIT =
NOWRAP = %option noyywrap
OBJDUMP = false
OBJEXT = o
OPENSSL_LIB_CPPFLAGS = -I/usr/pkg/include
OPENSSL_LIB_LDFLAGS = -L/usr/pkg/lib
OPENSSL_LIB_LIB = -lcrypto
OTOOL =
OTOOL64 =
PACKAGE = cfengine
PACKAGE_BUGREPORT =
PACKAGE_NAME =
PACKAGE_STRING =
PACKAGE_TARNAME =
PACKAGE_VERSION =
PATH_SEPARATOR = :
PS2PDF = false
PTHREAD_CC = gcc
PTHREAD_CFLAGS = -D_REENTRANT
PTHREAD_CPPFLAGS = -D_REENTRANT
PTHREAD_LIBS = -lpthreads
RANLIB = ranlib
SED = /usr/pkg/bin/nbsed
SET_MAKE =
SHELL = /usr/pkg/bin/pdksh
STRIP = strip
TEXI2DVI = /usr/pkg/bin/texi2dvi
VERSION = 2.2.10
YACC = bison -y
YFLAGS =
abs_builddir = /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10
abs_srcdir = /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10
abs_top_builddir = /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10
abs_top_srcdir = /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10
ac_ct_CC =
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof – “$$tardir”
am__untar = ${AMTAR} xf –
bindir = ${exec_prefix}/bin
build = alpha-dec-osf5.1
build_alias = alpha-dec-osf5.1
build_cpu = alpha
build_os = osf5.1
build_vendor = dec
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = $(pkgdatadir)
dvidir = ${docdir}
exec_prefix = ${prefix}
host = alpha-dec-osf5.1
host_alias = alpha-dec-osf5.1
host_cpu = alpha
host_os = osf5.1
host_vendor = dec
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /pkgsrc/pkgsrc-current/sysutils/cfengine2/work/cfengine-2.2.10/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = print -r
mandir = /usr/pkg/man
mkdir_p = /usr/pkg/bin/gmkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/pkg
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = alpha-dec-osf5.1
target_alias =
target_cpu = alpha
target_os = osf5.1
target_vendor = dec
top_build_prefix =
top_builddir = .
top_srcdir = .
DOC_DIR =
#DOC_DIR = doc
SUBDIRS = pub src contrib inputs $(DOC_DIR)
EXTRA_DIST = acconfig.h doc/cfengine.8 COPYING ChangeLog INSTALL NEWS README LICENSE
doc_DATA = README ChangeLog INSTALL NEWS
#
# Some basic clean ups
#
MOSTLYCLEANFILES = *~
#
# Get everything removed down to where rebuilding requires:
# “make; make install”
#
CLEANFILES =
#
# Get everything removed down to where rebuilding requires:
# “configure; make; make install”
#
DISTCLEANFILES =
#
# Get everything removed down to where rebuilding requires:
# “aclocal; autoconf; autoheader; automake –add-missing”
# “configure; make; make install”
#
MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.sub \
configure install-sh missing mkinstalldirs depcomp ylwrap \
ltmain.sh mdate-sh
all: all-recursive
.SUFFIXES:
am–refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case ‘$(am__configure_deps)’ in \
*$$dep*) \
echo ‘ cd $(srcdir) && $(AUTOMAKE) –gnu ‘; \
cd $(srcdir) && $(AUTOMAKE) –gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ‘ cd $(top_srcdir) && $(AUTOMAKE) –gnu Makefile’; \
cd $(top_srcdir) && \
$(AUTOMAKE) –gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case ‘$?’ in \
*config.status*) \
echo ‘ $(SHELL) ./config.status’; \
$(SHELL) ./config.status;; \
*) \
echo ‘ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)’; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status –recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
install-docDATA: $(doc_DATA)
@$(NORMAL_INSTALL)
test -z “$(docdir)” || $(MKDIR_P) “$(DESTDIR)$(docdir)”
@list=’$(doc_DATA)’; for p in $$list; do \
if test -f “$$p”; then d=; else d=”$(srcdir)/”; fi; \
f=$(am__strip_dir) \
echo ” $(docDATA_INSTALL) ‘$$d$$p’ ‘$(DESTDIR)$(docdir)/$$f'”; \
$(docDATA_INSTALL) “$$d$$p” “$(DESTDIR)$(docdir)/$$f”; \
done
uninstall-docDATA:
@$(NORMAL_UNINSTALL)
@list=’$(doc_DATA)’; for p in $$list; do \
f=$(am__strip_dir) \
echo ” rm -f ‘$(DESTDIR)$(docdir)/$$f'”; \
rm -f “$(DESTDIR)$(docdir)/$$f”; \
done
# This directory’s subdirectories are mostly independent; you can cd
# into them and run `make’ without going through this Makefile.
# To change the values of `make’ variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status’, edit `config.status’
# (which will cause the Makefiles to be regenerated when you run `make’);
# (2) otherwise, pass the desired values on the `make’ command line.
$(RECURSIVE_TARGETS):
@failcom=’exit 1′; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | –[!k]*);; \
*k*) failcom=’fail=yes’;; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list=’$(SUBDIRS)’; for subdir in $$list; do \
echo “Making $$target in $$subdir”; \
if test “$$subdir” = “.”; then \
dot_seen=yes; \
local_target=”$$target-am”; \
else \
local_target=”$$target”; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test “$$dot_seen” = “no”; then \
$(MAKE) $(AM_MAKEFLAGS) “$$target-am” || exit 1; \
fi; test -z “$$fail”
$(RECURSIVE_CLEAN_TARGETS):
@failcom=’exit 1′; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | –[!k]*);; \
*k*) failcom=’fail=yes’;; \
esac; \
done; \
dot_seen=no; \
case “$@” in \
distclean-* | maintainer-clean-*) list=’$(DIST_SUBDIRS)’ ;; \
*) list=’$(SUBDIRS)’ ;; \
esac; \
rev=”; for subdir in $$list; do \
if test “$$subdir” = “.”; then :; else \
rev=”$$subdir $$rev”; \
fi; \
done; \
rev=”$$rev .”; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo “Making $$target in $$subdir”; \
if test “$$subdir” = “.”; then \
local_target=”$$target-am”; \
else \
local_target=”$$target”; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z “$$fail”
tags-recursive:
list=’$(SUBDIRS)’; for subdir in $$list; do \
test “$$subdir” = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list=’$(SUBDIRS)’; for subdir in $$list; do \
test “$$subdir” = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list=’$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)’; \
unique=`for i in $$list; do \
if test -f “$$i”; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ‘{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }’`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) –etags-include –version) >/dev/null 2>&1; then \
include_option=–etags-include; \
empty_fix=.; \
else \
include_option=–include; \
empty_fix=; \
fi; \
list=’$(SUBDIRS)’; for subdir in $$list; do \
if test “$$subdir” = .; then :; else \
test ! -f $$subdir/TAGS || \
tags=”$$tags $$include_option=$$here/$$subdir/TAGS”; \
fi; \
done; \
list=’$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)’; \
unique=`for i in $$list; do \
if test -f “$$i”; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ‘{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }’`; \
if test -z “$(ETAGS_ARGS)$$tags$$unique”; then :; else \
test -n “$$unique” || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
list=’$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)’; \
unique=`for i in $$list; do \
if test -f “$$i”; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ‘{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }’`; \
test -z “$(CTAGS_ARGS)$$tags$$unique” \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d $(distdir) || mkdir $(distdir)
@srcdirstrip=`echo “$(srcdir)” | sed ‘s/[].[^$$\\*]/\\\\&/g’`; \
topsrcdirstrip=`echo “$(top_srcdir)” | sed ‘s/[].[^$$\\*]/\\\\&/g’`; \
list=’$(DISTFILES)’; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e “s|^$$srcdirstrip/||;t” \
-e “s|^$$topsrcdirstrip/|$(top_builddir)/|;t”`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo “$$dist_files” | \
sed ‘/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,’ | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo “/$$file” | sed -e ‘s,/[^/]*$$,,’`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list=’$(DIST_SUBDIRS)’; for subdir in $$list; do \
if test “$$subdir” = .; then :; else \
test -d “$(distdir)/$$subdir” \
|| $(MKDIR_P) “$(distdir)/$$subdir” \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir=”$$top_distdir” \
distdir=”$$distdir/$$subdir” \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case ‘$(DIST_ARCHIVES)’ in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e ‘s,^[^:\\/]:[\\/],/,’` \
&& dc_destdir=”$${TMPDIR-/tmp}/am-dc-$$$$/” \
&& cd $(distdir)/_build \
&& ../configure –srcdir=.. –prefix=”$$dc_install_base” \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir=”$$dc_install_base” \
distuninstallcheck \
&& chmod -R a-w “$$dc_install_base” \
&& ({ \
(cd ../.. && umask 077 && mkdir “$$dc_destdir”) \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR=”$$dc_destdir” install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR=”$$dc_destdir” uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR=”$$dc_destdir” \
distuninstallcheck_dir=”$$dc_destdir” distuninstallcheck; \
} || { rm -rf “$$dc_destdir”; exit 1; }) \
&& rm -rf “$$dc_destdir” \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo “$(distdir) archives ready for distribution: “; \
list=’$(DIST_ARCHIVES)’; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e ‘$$p’ -e ‘$$x’
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo “ERROR: files left after uninstall:” ; \
if test -n “$(DESTDIR)”; then \
echo ” (check DESTDIR support)”; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test ‘$(srcdir)’ = . ; then \
echo “ERROR: distcleancheck can only run from a VPATH build” ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo “ERROR: files left in build directory after distclean:” ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in “$(DESTDIR)$(docdir)”; do \
test -z “$$dir” || $(MKDIR_P) “$$dir”; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM=”$(INSTALL_STRIP_PROGRAM)” \
install_sh_PROGRAM=”$(INSTALL_STRIP_PROGRAM)” INSTALL_STRIP_FLAG=-s \
`test -z ‘$(STRIP)’ || \
echo “INSTALL_PROGRAM_ENV=STRIPPROG=’$(STRIP)'”` install
mostlyclean-generic:
-test -z “$(MOSTLYCLEANFILES)” || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z “$(CLEANFILES)” || rm -f $(CLEANFILES)
distclean-generic:
-test -z “$(CONFIG_CLEAN_FILES)” || rm -f $(CONFIG_CLEAN_FILES)
-test -z “$(DISTCLEANFILES)” || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo “This command is intended for maintainers to use”
@echo “it deletes files that may require special tools to rebuild.”
-test -z “$(MAINTAINERCLEANFILES)” || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-docDATA
install-dvi: install-dvi-recursive
install-exec-am:
install-html: install-html-recursive
install-info: install-info-recursive
install-man:
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-docDATA
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am–refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
distclean distclean-generic distclean-libtool distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-docDATA install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am uninstall-docDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Final compiled file content on Tru64 5.1B
lib/libcfengine.la man/man8/cfagent.8 man/man8/cfengine.8 man/man8/cfenvd.8 man/man8/cfenvgraph.8 man/man8/cfetoolcheck.8 man/man8/cfetoolcreate.8 man/man8/cfetooldump.8 man/man8/cfetoolgraph.8 man/man8/cfetoolimport.8 man/man8/cfetoolinfo.8 man/man8/cfetoolupdate.8 man/man8/cfexecd.8 man/man8/cfkey.8 man/man8/cfrun.8 man/man8/cfservd.8 man/man8/cfshow.8 sbin/cfagent sbin/cfdoc sbin/cfenvd sbin/cfenvgraph sbin/cfetool sbin/cfetoolgraph sbin/cfexecd sbin/cfkey sbin/cfrun sbin/cfservd sbin/cfshow share/cfengine/ChangeLog share/cfengine/INSTALL share/cfengine/NEWS share/cfengine/README share/cfengine/cfengine.el share/examples/cfengine/cf.chflags.example share/examples/cfengine/cf.freebsd.example share/examples/cfengine/cf.ftp.example share/examples/cfengine/cf.groups.example share/examples/cfengine/cf.linux.example share/examples/cfengine/cf.main.example share/examples/cfengine/cf.motd.example share/examples/cfengine/cf.preconf.example share/examples/cfengine/cf.services.example share/examples/cfengine/cf.site.example share/examples/cfengine/cf.solaris.example share/examples/cfengine/cf.sun4.example share/examples/cfengine/cf.users.example share/examples/cfengine/cfagent.conf-advanced.example share/examples/cfengine/cfagent.conf.example share/examples/cfengine/cfrc.example share/examples/cfengine/cfrun.hosts.example share/examples/cfengine/cfservd.conf.example share/examples/cfengine/update.conf.example
